Select your business area

We use this information to provide content associated with segment of your choice.
You can change your selection any time.

Training

Unleash the full potential of your DEIF products

Choose country

Rental Power

Read more
21.04.2020 - 22.04.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Rental Power Generation Training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

Controllers discussed in this training

AGC-4, DVC 310, AGC 150, RMB, Insight

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a rental generator application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator controllers and utility controllers to provide stable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having reliable power generation for the customer.

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPM 300

Operator/Service Read more
23.04.2020 - 24.04.2020
Skive, Denmark
EUR 850
Available
Register Read more

PPM 300

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPM 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications.

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGC

Service level Read more
29.04.2020 - 30.04.2020
Skive, Denmark
EUR 850
Available
Register Read more

AGC

  • This training course is for service technicians and engineers who commission and troubleshoot genset operations.

Your outcome

  • You will learn how to use the different configuration inputs, modes of operation, and how to change protection settings.
  • You will learn how to use the controller and obtain in-depth knowledge of the functionalities it offers.
  • You will learn how to access the menus from the front panel display screen to activate, commission and troubleshoot typical applications. Input from you on your typical applications further build these skills.
  • You will learn how to connect the utility software and configure I/Os, parameter settings, and additional operator panels (AOP). This will also involve tuning of PIDs, synchronisation and using the utility software as a troubleshooting tool.

Prerequisites

The AGC Service training is for everyone and does not require any prior training. Most important is that you are motivated to learn, but general knowledge of the industry is an advantage.

Please note that the training will be conducted in English and that you have to bring a laptop with a LAN port. You will have to install software on your PC, so please check if it requires special permission from your IT-administrator.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

CRITICAL POWER

Read more
05.05.2020 - 06.05.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Critical Power Training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

Controllers discussed in this training

AGC-4, ASC-4, DVC-310, ALC-4

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a critical power application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator, AVR, automatic load controller, and utility controllers to provide reliable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having a reliable critical power application. 

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGC-4

Service level Read more
12.05.2020 - 13.05.2020
Bensheim, Germany
On request
Available
Register Read more

AGC-4


Die zweitägige Produktschulung ist auf die Anforderungen an Inbetriebnehmer und Servicemitarbeiter zugeschnitten. Die Schulung wird in einer kleinen Gruppe durchgeführt. Dies ermöglicht Flexibilität und Effektivität und bietet viel Zeit für praktische Übungen.

Folgende Inhalte werden vermittelt:

Einführung
-Bedienung über das Display
-Fehleranalyse über das Display
-Interne und externe Kommunikation
-Betriebsarten

Anlagenbetriebsarten
-Notstrom / Netzparallel / Spitzenlast / Netzbezugsregelung / Sprinkler

Grundfunktionen der Synchronisation

Synchronisation
-Dynamisch
-Statisch

Regelungstechnik
-PID-Regler
-Zwei-/Dreipunktregler

Maschinen- und Generatorschutz

Applikationsbeispiele
-Übungen zu verschiedenen Applikationen

Bediensoftware - USW 
-Verbindungsaufbau
-Parametrierung
-AOP-Konfiguration
-M-Logic-Programmierung
-Fehleranalyse und Auslesen der Logs

Power-Management-Systeme
-Einbinden eines Systems
-Parametrierung
-Praktische Übungen

Nieder- und Mittelspannungsschutz

HMI-Lösungen und Funktionen
-Touch-Panel-Lösungen (AGI) 

Praktische Übungen zu den Steuerungen
-Kundenspezifische Übungen
Gerne unterbreitet Ihnen unsere Frau Seidl ein unverbindliches Angebot. Senden Sie Ihre Anfrage bitte an germany@deif.com.
Um einen optimalen Lernerfolg sicherzustellen, ist die Teilnehmerzahl begrenzt. Der Eingang der Anmeldung bestimmt über die Teilnahme. Nach Eingang Ihrer schriftlichen Anmeldung geht Ihnen eine Anmeldebestätigung zu. Wir behalten uns vor, eine Schulung aus wichtigen Gründen abzusagen. Wir würden uns sehr freuen, Sie bei unserer Produktschulung begrüßen zu können. 

Wichtiger Hinweis 
Jeder Schulungsteilnehmer benötigt ein eigenes Notebook mit mindestens Vista Betriebssystem. 
Register Close

PPU 300

Operator/Service Read more
12.05.2020 - 13.05.2020
Skive, Denmark
EUR 850
Available
Register Read more

PPU 300

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPU 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications. 

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGI

Designer level Read more
14.05.2020
Skive, Denmark
EUR 425
Available
Register Read more

AGI

  • This training course is for designers who require detailed knowledge of the DEIF controllers capabilities in order to make the right offer to meet application requirements.Designers will learn how to specify a genset controller with regards to option selection, how to design an application for DEIF controllers and how to setup advanced power management applications.

Your outcome

  • You will learn how to use the technical documentation as a tool for option selection to meet application requirements
  • Through practical exercises, you will learn to setup advanced power management applications using DEIF Utility Software
  • Via hands-on training you will gain knowledge about different modes of operation in power management applications
  • You will learn to emulate an entire application though practical application and function training

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPU 300

Codesys Read more
14.05.2020
Skive, Denmark
EUR 425
Available
Register Read more

PPU 300 CODESYS

The PPU 300 CODESYS training is for switchboard builders and system integrators. The training course will provide you with tools and knowledge on how to use the PPU 300 in a CODESYS application. The training includes various hand-on sessions and will enable you to make customised project solutions.

Course prerequisites

Attending the PPU 300 CODESYS training session requires completion of the PPU 300 Service course. 

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Hybrid/ Microgrid

Read more
19.05.2020 - 20.05.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Hybrid/Microgrid training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

  • Off-grid PV solution—combination of PV + diesel generator and/or battery
  • Grid-tied PV only solution—combination of PV + DG + utility
  • Battery solution—power source vs energy source, handling of charging and discharging scheme
  • Putting it all together—PV + battery + generator + utility

Controllers discussed in this training

AGC-4, ASC-4, DVC-310, AGC 150

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a hybrid/microgrid application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator, battery, solar, and utility controllers to provide stable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having a reliable hybrid/microgrid application. 

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Marine Power

Read more
09.06.2020 - 10.06.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Marine Power Training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

  • Power Management features and functions
  • Advanced blackout prevention
  • Differences between PPU and PPM controllers – When to use what
  • Energy Management – optimize fuel consumption
  • Medium voltage relays

Controllers/products discussed in this training

PPU-300PPM-300MVRBlueflow, Switchboard instrumentation

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a marine power application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generators, bus tie breakers, shaft generators, and shore controllers to provide stable power to the vessel. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having reliable power on board any vessel.

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

 
Register Close

AGC

Service level Read more
10.06.2020 - 11.06.2020
Skive, Denmark
EUR 850
Available
Register Read more

AGC

  • This training course is for service technicians and engineers who commission and troubleshoot genset operations.

Your outcome

  • You will learn how to use the different configuration inputs, modes of operation, and how to change protection settings.
  • You will learn how to use the controller and obtain in-depth knowledge of the functionalities it offers.
  • You will learn how to access the menus from the front panel display screen to activate, commission and troubleshoot typical applications. Input from you on your typical applications further build these skills.
  • You will learn how to connect the utility software and configure I/Os, parameter settings, and additional operator panels (AOP). This will also involve tuning of PIDs, synchronisation and using the utility software as a troubleshooting tool.

Prerequisites

The AGC Service training is for everyone and does not require any prior training. Most important is that you are motivated to learn, but general knowledge of the industry is an advantage.

Please note that the training will be conducted in English and that you have to bring a laptop with a LAN port. You will have to install software on your PC, so please check if it requires special permission from your IT-administrator.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Rental Power

Read more
23.06.2020 - 24.06.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Rental Power Generation Training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

Controllers discussed in this training

AGC-4DVC 310AGC 150RMBInsight

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a rental generator application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator controllers and utility controllers to provide stable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having reliable power generation for the customer.

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Critical Power

Read more
07.07.2020 - 08.07.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Critical Power Training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

Controllers discussed in this training

AGC-4ASC-4DVC-310ALC-4

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a critical power application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator, AVR, automatic load controller, and utility controllers to provide reliable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having a reliable critical power application. 

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Hybrid/ Microgrid

Read more
21.07.2020 - 22.07.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Hybrid/Microgrid training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

  • Off-grid PV solution—combination of PV + diesel generator and/or battery
  • Grid-tied PV only solution—combination of PV + DG + utility
  • Battery solution—power source vs energy source, handling of charging and discharging scheme
  • Putting it all together—PV + battery + generator + utility

Controllers discussed in this training

AGC-4ASC-4DVC-310AGC 150

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a hybrid/microgrid application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator, battery, solar, and utility controllers to provide stable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having a reliable hybrid/microgrid application. 

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Marine Power

Read more
04.08.2020 - 05.08.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Marine Power Training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

  • Power Management features and functions
  • Advanced blackout prevention
  • Differences between PPU and PPM controllers – When to use what
  • Energy Management – optimize fuel consumption
  • Medium voltage relays

Controllers/products discussed in this training

PPU-300PPM-300MVRBlueflow, Switchboard instrumentation

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a marine power application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generators, bus tie breakers, shaft generators, and shore controllers to provide stable power to the vessel. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having reliable power on board any vessel.

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

 
Register Close

Rental Power

Read more
18.08.2020 - 19.08.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Rental Power Generation Training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

Controllers discussed in this training

AGC-4DVC 310AGC 150RMBInsight

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a rental generator application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator controllers and utility controllers to provide stable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having reliable power generation for the customer.

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPU 300

Operator/Service Read more
08.09.2020 - 09.09.2020
Skive, Denmark
EUR 850
Available
Register Read more

PPU 300

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPU 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications. 

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPM 300

Operator/Service Read more
10.09.2020 - 11.09.2020
Skive, Denmark
EUR 850
Available
Register Read more

PPM 300

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPM 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications.

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Critical Power

Read more
15.09.2020 - 16.09.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Critical Power Training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

Controllers discussed in this training

AGC-4ASC-4DVC-310ALC-4

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a critical power application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator, AVR, automatic load controller, and utility controllers to provide reliable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having a reliable critical power application. 

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGI

Designer level Read more
17.09.2020
Skive, Denmark
EUR 425
Available
Register Read more

AGI

  • This training course is for designers who require detailed knowledge of the DEIF controllers capabilities in order to make the right offer to meet application requirements.Designers will learn how to specify a genset controller with regards to option selection, how to design an application for DEIF controllers and how to setup advanced power management applications.

Your outcome

  • You will learn how to use the technical documentation as a tool for option selection to meet application requirements
  • Through practical exercises, you will learn to setup advanced power management applications using DEIF Utility Software
  • Via hands-on training you will gain knowledge about different modes of operation in power management applications
  • You will learn to emulate an entire application though practical application and function training

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGC

Service level Read more
23.09.2020 - 24.09.2020
Skive, Denmark
EUR 850
Available
Register Read more

AGC

  • This training course is for service technicians and engineers who commission and troubleshoot genset operations.

Your outcome

  • You will learn how to use the different configuration inputs, modes of operation, and how to change protection settings.
  • You will learn how to use the controller and obtain in-depth knowledge of the functionalities it offers.
  • You will learn how to access the menus from the front panel display screen to activate, commission and troubleshoot typical applications. Input from you on your typical applications further build these skills.
  • You will learn how to connect the utility software and configure I/Os, parameter settings, and additional operator panels (AOP). This will also involve tuning of PIDs, synchronisation and using the utility software as a troubleshooting tool.

Prerequisites

The AGC Service training is for everyone and does not require any prior training. Most important is that you are motivated to learn, but general knowledge of the industry is an advantage.

Please note that the training will be conducted in English and that you have to bring a laptop with a LAN port. You will have to install software on your PC, so please check if it requires special permission from your IT-administrator.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Hybrid/ Microgrid

Read more
29.09.2020 - 30.09.2020
Wood Dale, Illinois
FREE
Available
Register Read more

Hybrid/Microgrid training

Who should attend?

This training session is geared towards operators, field service techs/engineers, and design engineers.

Important topics discussed

  • Off-grid PV solution—combination of PV + diesel generator and/or battery
  • Grid-tied PV only solution—combination of PV + DG + utility
  • Battery solution—power source vs energy source, handling of charging and discharging scheme
  • Putting it all together—PV + battery + generator + utility

Controllers discussed in this training

AGC-4ASC-4DVC-310AGC 150

Expected outcome

From this course, the attendee will have a good understanding of what is needed to set up a hybrid/microgrid application using the various controllers and components offered by DEIF. This will include knowledge of the control schemes that take place between the generator, battery, solar, and utility controllers to provide stable power to the end user. The attendee will learn the role of each component discussed, will get an overview of the utility software used to interface with the controllers, and will understand how everything fits together to accomplish the end goal of having a reliable hybrid/microgrid application. 

Training is the cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGC 150

Service level Read more
07.10.2020 - 08.10.2020
Skive, Denmark
EUR 850
Available
Register Read more

AGC 150

  • This training course is for service technicians and engineers who commission and troubleshoot genset operations.

Your outcome

  • You will learn to navigate the controller and utility software. 
  • You will learn how to use the different configuration inputs, modes of operation, and how to change protection settings.
  • You will learn how to use the controller and obtain in-depth knowledge of the functionalities it offers.
  • You will learn how to access the menus from the controller screen to activate, commission and troubleshoot typical applications. Input from you on your typical applications, further build these skills.
  • You will learn how to connect the utility software and configure I/Os, and parameter settings. It will also involve tuning of PIDs, synchronisation and using the utility software as a troubleshooting tool. 

Prerequisites

The AGC-150 training is for everyone and does not require any prior training. Most important is that you are motivated to learn, but general knowledge of the industry is an advantage.

Please note that the training will be conducted in English and that you have to bring a laptop with a LAN port. You will have to install software on your PC, so please check if it requires special permission from your IT-administrator.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.
The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

DVC

Read more
21.10.2020 - 22.10.2020
Skive, Denmark
EUR 850
Available
Register Read more

DVC 550

This training course is for you who are working with commissioning and troubleshooting of digital voltage controllers (DAVR)

Your outcome

  • You will learn to set up and troubleshoot DEIF’s digital voltage regulator DVC 550
  • You will get an introduction to the DVC 550 hardware and the EasyReg PC configuration software. 
  • You will learn the different modes of the DVC 550 and how to use them, and how to interface to the DVC 550.

Course prerequisites

Attending the DVC training session presupposes completion of the AGC Service course

Please note that the training will be conducted in English and that you have to bring a laptop with a LAN port. You will have to install software on your PC, so please check if it requires special permission from your IT-administrator.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGI

Designer level Read more
22.10.2020
Skive, Denmark
EUR 425
Available
Register Read more

AGI

  • This training course is for designers who require detailed knowledge of the DEIF controllers capabilities in order to make the right offer to meet application requirements.Designers will learn how to specify a genset controller with regards to option selection, how to design an application for DEIF controllers and how to setup advanced power management applications.

Your outcome

  • You will learn how to use the technical documentation as a tool for option selection to meet application requirements
  • Through practical exercises, you will learn to setup advanced power management applications using DEIF Utility Software
  • Via hands-on training you will gain knowledge about different modes of operation in power management applications
  • You will learn to emulate an entire application though practical application and function training

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPM 3

Operator/Service Read more
28.10.2020 - 29.10.2020
Skive, Denmark
EUR 850
Available
Register Read more

PPM-3

This two-day training course is for operators and service technicians. You will learn the basic functions of the PPM-3 controller and how to carry out daily routine operations. When familiar with the basic functions, you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications. 

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation, and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.
DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  
 
We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.
 
The sessions are carried out in small groups for greater flexibility and more involvement.
Register Close

PPU 300

Operator/Service Read more
04.11.2020 - 05.11.2020
Skive, Denmark
EUR 850
Available
Register Read more

PPU 300

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPU 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications. 

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPU 300

Codesys Read more
05.11.2020
Skive, Denmark
EUR 425
Available
Register Read more

PPU 300 Codesys

The PPU 300 CODESYS training is for switchboard builders and system integrators. The training course will provide you with tools and knowledge on how to use the PPU 300 in a CODESYS application. The training includes various hand-on sessions and will enable you to make customised project solutions.

Course prerequisites

Attending the PPU 300 Codesys training session tracompletion of the PPU 300 Service course. 

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPU 300

Operator/Service Read more
17.11.2020 - 18.11.2020
Skive, Denmark
EUR 850
Available
Register Read more

PPU 300

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPU 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications. 

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPM 300

Operator/Service Read more
19.11.2020 - 19.11.2020
Skive, Denmark
EUR 850
Waiting list
Register Read more

PPM 300

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPM 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications.

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGC

Service level Read more
24.11.2020 - 25.11.2020
Skive, Denmark
EUR 850
Available
Register Read more

AGC

  • This training course is for service technicians and engineers who commission and troubleshoot genset operations.

Your outcome

  • You will learn how to use the different configuration inputs, modes of operation, and how to change protection settings.
  • You will learn how to use the controller and obtain in-depth knowledge of the functionalities it offers.
  • You will learn how to access the menus from the front panel display screen to activate, commission and troubleshoot typical applications. Input from you on your typical applications further build these skills.
  • You will learn how to connect the utility software and configure I/Os, parameter settings, and additional operator panels (AOP). This will also involve tuning of PIDs, synchronisation and using the utility software as a troubleshooting tool.

Prerequisites

The AGC Service training is for everyone and does not require any prior training. Most important is that you are motivated to learn, but general knowledge of the industry is an advantage.

Please note that the training will be conducted in English and that you have to bring a laptop with a LAN port. You will have to install software on your PC, so please check if it requires special permission from your IT-administrator.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGC

Designer level Read more
26.11.2020 - 27.11.2020
Skive, Denmark
EUR 850
Available
Register Read more

AGC Designer

This training course is for designers who require detailed knowledge of the DEIF controller’s capabilities to be able to design and configure advanced power management systems. 

Your outcome

  • You will learn to setup a power management system with multiple mains and BTB’s.
  • You will learn which options of the controller to integrate into an application and how to design a switchboard for DEIF controllers.
  • You will be able to troubleshoot advanced power management systems and recognize different plant modes
  • You will learn to program custom AGC logic

Course prerequisites

The AGC Designer training session presupposes completion of the AGC Service. Attending both levels of AGC training will give you an in-depth gradual learning scale that enables you to fully master the sophisticated features of your power management system.

Please note that the training will be conducted in English and that you have to bring a laptop with a LAN port. You will have to install software on your PC, so please check if it requires special permission from your IT-administrator.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement

 
Register Close

Leter du etter programvare, dokumentasjon eller tekniske artikler?

Et unikt varemerke for DEIF i flere tiår, vi tilbyr gratis ubegrenset tilgang til programvareoppdateringer, teknisk detaljert produktdokumentasjon sammen med tekniske artikler til opplæring og inspirasjon om bransjerelevante temaer for morgendagen.